500KVA AC Resistance Butt Welding Machine for Iron Wire Mesh
Machine Parameter
Machine Dimension (mm)
| Item |
Height |
Length |
Width |
| Diamension(mm) |
2315 |
1444 |
1634 |
| Item |
Parameter |
| Rated Capacity |
500KVA |
| Power Supply |
380V+-10% / 3PH / 50Hz,60Hz |
| Max Primary Current |
400A |
| Rated Duty Cycle |
50% |
| Max Short Cut Current |
29KA |
Controller function:
1. There is automatic calibrating system for Welding Current.
2. Support totally 64 welding programs on the programmer. And 16 welding programs are available for external IO. (The external IO's program selection are used with the air pressure switch, light curtain, door lock.)
3. It supports proportional valve function: The output voltage is 0-10V. W
4.It has total three independently welding voltage for each weld: Welding Voltage 1,Welding Voltage 2,Welding Voltage 3. For welding voltage 2, you can set up to 9 pulses for it.
And there are also independent welding voltage and current monitoring function for welding 1,2,3.
5. With the proportional valve,it can achieve stepper pressure, saddle pressure. It supports two kinds of pressure setting modes, one is percentage mode and the other is KN mode(this function is optional).
6. Automatic Repeat Welding Function.
When the real time welding current is lower than the lowest-set value,the welder will automatic execute the repeat welding and the repeat welding times can also be set by user.
7. The dressing pressure is independently adjusted. When in dressing mode, will switch into dressing pressure.The cylinder's going up and down pressure's value can be different.
8. The communication port.
One RS232 (Mod-bus RTU protocol. Baud rate is fixed at 115200bps, 8 data bits, 1bit is stop bits, three is no odd-even calibrate).
One RS485 (Mod-bus RTU protocol.Baud rate is fixed at 19200bps, 8 data bits, 1bit is stop bits, three is no odd-even calibrate) .This is convenient for transferring data out.
9. Electrodes dressing and replacement function: There is alarm for dressing and replacing electrodes.And welding spots number for pre-warning can be set.
10. Counter for Welds.
This welder can count shift production, total production, and total welds. It can monitor the missing welds or more welds.
11. This welder has self-protecting functions.
It can detect water flow and water temperature.With this function,it can prevent overheating damage to the equipment.
12. Alarms Recording Function.
It can record 512pcs alarm messages.
Company Introduction
Heron was established in 1991. During this 28 years, Heron has been dedicated in the R&D and manufacture of welding equipment , also the promotion of clinching system . Formed the standard products and customized two series of products.
And now, Heron has grown up to a larger scale company, with a production base over 56,000 square meters .
Heron's products have a wide application, which include automotive manufacturing, low voltage electrical, compressor manufacturing, household appliance manufacturing and motor manufacturing industry.
Besides, Heron also becomes a long-term supplier for many famous enterprises, such as Volkswagen, Benteler, Johnson Control, Emerson, Siemens, etc. Meanwhile, Heron's products have been exported to overseas market, such as the United States, Canada, France, Italy, Poland, Brazil, Mexico, India, Egypt, Saudi Arabia ,etc.
FAQ
1.What's the trade terms?
A: FOB, EX-Work, CRF
2.What's the payment term?
A: a. T/T 30% as deposit, 70% should be paid before delivery.
b. L/C at sight
3. What's the delivery time?
A: 2-3 months after received 30% deposit.
4. What's the package way?
A: Wooden case
5. Which shipment port?
A: Guangzhou or Huangpu
6.How long is the guarantee?
A: For one year after customer received the machine. (It's not including the comsumables)
Audited Supplier 
){kind=link}