- Model NO.: DR-12000-12003
Model Name :12KJ CD Welder For Automobile Window lifter Rail
Model No. :DR-12000-12003 Material No.:
This CD welder can weld the left,middle,right ,three parts of the rail. It can weld symmetry parts. Accurate,fast positioning. Suitable for volume production. with wide application.
A. Customized welding equipment for automobile lifting rails. It can weld various work pieces by easy and fast tooling changing.
B.Use Schneider GXO tough HMI. Timely display charging status and voltage values.
Instant high current are obtained in welding.Voltage fluctuations of power grid will not have a direct impact on the welder.
With fast logic circuits, good welding effect and accurate voltage regulation are ensured, even at high welding operating frequency.The is error rate is within 1%.
Energy saving, can saves 50% than AC welder. Lower demand on the power grid.
C. Instant high current are obtained in welding.
Voltage fluctuations of power grid will not have a direct impact on the welder.
D. Real time air pressure and current monitors. Timely alarms occur when actual welding parameter out of the set range. Thus welding quality is ensured.
E. Position of the cylinders can be adjusted by of the lead screw on both sides,to adapt to different brackets' distance.
Upper electrodes' plate center distance is adjustable from 240-580MM,thus this welder have wide application.
A. Apply in automotive spare parts manufacturing.
Can weld:1.2mm +1.2 mm aluminum;2.0mm +2.0 mm copper;
2.2mm +2.2 mm mild steel,stainless steel and other materials welding.
B. Also use to weld high-energy demand parts. Like precision instruments, meters, electric vacuum devices, metal filaments and dissimilar metal.
|L W H (mm)||Volume|
Main technical parameter :
|Rated Capacity J||12000|
|Power Supply V/φ/HZ||380 V/ 3 Phrase /50Hz|
|Primary Current A||40|
|Duty cycle %||50|
|Secondary Empty Voltage V||10/12|
|Secondary voltage adjustment Level||2|
|Throat Depth mm||300|
|Gap between Electrode Arm mm||500|
|Stroke of cylinder mm||120|
|Electrode Size mm||Depend on workpiece|
|Workpiece Size mm||Window lifter rail and bracket|
|Welding Capacity mm||1.2mm+1.2mm|
|Welding Speed (pc/min)||7 pc/min|
|Working Pressure N/0.5Mpa||10000|
|Compressed Air Pressure MPa||≥0.6|
|Compressed Air Consumption(0.4MPa,Stroke 30mm) L/time||5.84*3|
|Cooling Water Consumption L/MIN||0|
|Primary Cable MM2||3*16+2*6|
|Max. Short Cut Current A||58600|