- Model NO.: DB-55-12002
- Current: Direct Current
- Application: Car
- Type: Spot Welders
- Model: Db
Model Name :55KVA Inverter welder for automobile rectifier bridge
Model No. : DB-55-12002 Material No.:C14-000599
1.Controlled system use Heron's own brand model HRC 801 controller.
It can precisely control welding current and time.Make sure the welding quality and increase welding stability.
2. Highly save customers' cost.Adopt inverter welding control theory. Largely reduce input power form the power supply. Cut the plant's cables cost. Impact to plant's power gird has reduced, when welders are working. 3. PLC control system use CANOPEN on site general wire technology to control each servo mechanism. Highly increase servo's locating precision. Simple wiring way, largely increases maintainability.
4. PLC control system set locating coordinate of welded spots. It has below two ways to proceed.
l Manual input the welded spot's location and each servo's value.
l Display function: Through the button to set current coordinates of each servo location.
l Highly increase parameter setting efficiency.
5.PLC and HMI data system can sore 1000 kinds of welding programs
Largely increase welder's ability to weld various work piece.
a. Apply in rectifier bridge of auto motor.By derive this welder's technology, it can adapt to low-voltage electrical and other industries.
b. Also applicable to workpieces, which need multi-points welding system,and high demand on location control system.
|L W H (mm)||Volume|
Main Technical Parameter:
|Rated Capacity KVA||55|
|Power Supply V/φ/HZ||380±10%/3P/50HZ|
|Max Input Current A||58|
|Rated Duty cycle %||20|
|Secondary Empty Voltage V||10|
|Secondary voltage adjust level||1|
|X axle movement platform range mm||0~300|
|Y axle movement platform range mm||0~300|
|Z axle Rotate ratio(Motor turn degree /turn table )|
|Throat Depth mm|
|Arm Gap mm|
|Cylinder Size & Stroke mm|
|Electrode Size mm||100*8*8|
|Workpiece Size mm||125|
|Welding Capacity mm|
|Welding Speed (s/ piece 8 spoints)|
|Max Working Pressure N/0.5MPa||825|
|Compressed Air Pressure MPa||0.6 <=P≤0.8|
|Compressed Air Consumption L/time|
|Cooling Water Consumption L/MIN||6|
|Motor Power W||3*400|
|Primary Cable MM2||3*16+2*16|
|Max. Short Cut Current KA||18.8|
|Dimension (L*W*H) mm||1399*1502*2056|
HERON MACHINE & ELECTRIC INDUSTRIAL CO., LTD. (Headquarters)
Address: No.9 Feng Ying Road Economy Developing Zone, Conghua, Guangzhou City,China
Tel:+86-020-87813325,87819588 , 87815075