- Model NO.: B0823-802-X30-S-13Z
- Current: Control
- Application: Car
- Type: Control
- Model: 802
MFDC Series -- Model HR802 Control Features
1.One control can control two guns at one time.
2.The inverter's output frequency is 1000Hz.
3.There are three current control methods.They are constant current,conduction angle,mixed-power.
4.With current stepper function,you can set total 8 current stepper.
5. With secondary -current automatic calibrating system.The deviation of welding current's set value and actual value are controlled in ±2%, with milliseconds current controlled accuracy.
6. Welding programs Links. It provides up to ten welding programs links to use at one time, can realize switching from multi-points,multi-standard welding.
7.Automatic re-welding function,has improved the welds' reliability.
8.There are two welds counters,with function for leakage welding,over welding and it also records total production.
9.Parameter copy function.Through hand-held programmer,it can realize parameter coping between equipment.
10. There are monitor function for the constant Current.When the actual current is out of set limit,there will be auto alarm and welder will stop.
11. The program selection use binary system.Each gun can maximum choose from 4 welding programs and the
12.Parameter will not loss and will store in ten years ,even there is power off.
13.With group control interlocking function.
14. Total five sections of adjustable current.They are Pre-welding,Weld 1, weld 2 (Weld 2 can set 9 pulse), weld 3,
15. Through the switches in the handles,you can control the gun from clamping, power on, loosen and stroke switching.
16. Electrode dressing and replace reminder function.Through the switch in the panel, you can switch to the dressing
17.There are ports for loading and unloading welding programs,it can programmed by a hand-held programmer.
18. Control welding pressure by proportional valve( 0-10V output ), 4 sections of pressure in each program can be adjust
19.Air switch with overload protection and short circuit protection.
20. Use Germany Bender 1000HZ electricity leakage monitoring device,the minimum monitoring value is 30mA. This
21.It has welding-spot confirming function,has improved the accuracy of welds' position.
22.It can record the latest 512 pcs alarms messages.
23.This control has RS232 (ModBus RTU), RS485 (ModBus RTU), CAN(ModBus RTU) communicate port.
24.With temperature,water flow monitor protection, can prevent the equipment from over hot.
HERON INTELLIGENT EQUIPMENT CO.,LTD (Headquarters)
Address: No.9 Feng Ying Road Economy Developing Zone, Conghua, Guangzhou City,China
Tel:+86-020-87813325,87819588 , 87815075