Gold Member Since 2015
Audited Supplier
Heron Intelligent Equipment Co., Ltd.

Portable Welding Machine, Welding Machine, Inverter Welding Machine manufacturer / supplier in China, offering Model Hr802 Inverter Portable Welder Control, Heron 440kVA Mfdc Welding Machine for Cooper Connector with Shell, 220kVA Mfdc Customized Welding & Cutting Machine for Braided Copper and so on.

(/ )

Supplier Homepage Product Standard Products 2 Transgun Model Hr802 Inverter Portable Welder Control

Model Hr802 Inverter Portable Welder Control

FOB Price: Get Latest Price
Min. Order: 1 Piece
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: B0823-802-X30-S-5-00
  • Current: Alternating Current
  • Application: Car
  • Type: Spot Welders
  • Model: HRC
Product Description
Model Hr802 Inverter Portable Welder Control
                                    -802 MFDC Series -- Model HR802 Control Features

1.One control can control two guns at one time.

2.The inverter's output frequency is 1000Hz.

3.There are three current control methods.They are constant current,conduction angle,mixed-power.

4.With current stepper function,you can set total 8 current stepper.

5. With secondary -current automatic calibrating system.The deviation of welding current's set value and actual
value are controlled in ±2%, with milliseconds current controlled accuracy.

6. Welding programs Links. It provides up to ten welding programs links to use at one time, can realize switching from multi-points,multi-standard welding.

7.Automatic re-welding function,has improved the welds' reliability.

8.There are two welds counters,with function for leakage welding,over welding and it also records total production.

9.Parameter copy function.Through hand-held programmer,it can realize parameter coping between equipment.

10. There are monitor function for the constant Current.When the actual current is out of set limit,there will be auto alarm and welder will stop.

11. The program selection use binary system.Each gun can maximum choose from 4 welding programs and the control can store max 64 programs.

12.Parameter will not loss and will store in ten years ,even there is power off.

13.With group control interlocking function.

14. Total five sections of adjustable current.They are Pre-welding,Weld 1, weld 2 (Weld 2 can set 9 pulse), weld 3, tempering. And there are Slope up, Slope down, and constant Current,conduction angle,mixed power are available.

15. Through the switches in the handles,you can control the gun from clamping, power on, loosen and stroke switching.

16. Electrode dressing and replace reminder function.Through the switch in the panel, you can switch to the dressing
mode(the gun has no current, and only has pressure) and choose the corresponding dressing program and pressure.

17.There are ports for loading and unloading welding programs,it can programmed by a hand-held programmer.

18. Control welding pressure by proportional valve( 0-10V output ), 4 sections of pressure in each program can be adjust
independently.There are KN and % pressure modes and with pressure auto-calibration function.(Optional item)

19.Air switch with overload protection and short circuit protection.

20. Use Germany Bender 1000HZ electricity leakage monitoring device,the minimum monitoring value is 30mA. This
is to protect people and equipment. (Optional item)

21.It has welding-spot confirming function,has improved the accuracy of welds' position.

22.It can record the latest 512 pcs alarms messages.

23.This control has RS232 (ModBus RTU), RS485 (ModBus RTU), CAN(ModBus RTU) communicate port.

24.With temperature,water flow monitor protection, can prevent the equipment from over hot.

Contact Us
Address: No.9 Feng Ying Road Economy Developing Zone, Conghua, Guangzhou City,China
Zip code:510900
Tel:+86-020-87813325,87819588 , 87815075
Send your message to this supplier
Miss Shelly Zheng
To: Miss Shelly Zheng

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now